How to use wire stripping pliers and precautions

Wire stripping pliers are composed of a cutting edge, a wire pressing edge, and a pliers handle. The handle of the wire stripping pliers is fitted with a sheath with a rated power and working current of 500V, and drilled with holes. Wire stripping pliers are suitable for stripping plastic, plastic sheathed wires, and cable cores. The method is to insert the wire head to be peeled into the cutting edge of the pliers, pinch the two pliers handles with your hand, and then use the spider genus to separate the sheath from the core wire. Used to loosen or pull the bundle joint or pipe bolt on the wire conduit, using the same method as the adjustable wrench.
The method of using wire stripping pliers
1. According to the thickness of the cable, choose the appropriate wire stripping blade first
2. Place the prepared cable at the end of the wire stripping tool's blade and prioritize selecting the width of the wire to be stripped
3. Grasp the handle of the wire stripping tool tightly, fasten the cable, and slowly peel off the outer keratin of the cable with both feet
4. Release the tool handle and extract the cable wire. At this point, the cable alloy appears neatly on the outside, and the remaining plastic sheath is clearly visible.
It should be noted that when using wire stripping pliers again, please pay attention to the following safety and reliability tips
1. Please wear a helmet when operating
2. In order to prevent accidental harm to people and objects around Yarui, please confirm Yarui's dumping path before unfolding the blockade
3. It is also necessary to close the front end of the blade and place it in a safe and reliable entertainment venue that is difficult for children to reach.